Coupled motors are designed with a one-sided elongated shaft connected by a split end cover with center hole. Two motors are connected by a coupling. This compact design is facilitated by the interaction of four vibration motors and achieves linear vibrating with very high Working Moments.General specifications
Voltages from 115 V to 690 V at 50 Hz and 60 Hz available
Degree of Protection:
F (155 °C) according to DIN EN 60034-1
Use high flexible cable for heavy mechanical stress for example: H07RN-F or A07RN-F according to DIN VDE 0282.
Permissible ambient temperature:
-20 to +40 °C
Continuous operation (S1) and discontinuous operation at 100 % centrifugal force.
Hoods made from pressed sheet metal, comprise the special shape. A silicone seal provides optimum protection against the ingress of dust and water.
Without limitation, motors can be mounted in any position.
Standard RAL 6011. Other colors available on request.
The type code is read as follows:
First block number = working moment in kgcm
(working moment = 2 x static Moment)
This is followed by a hyphen and then the pole number.
Where: 4 = 1460 rpm 6 = 980 rpm (at 50 Hz mains frequency).
Behind the second dash, the size is specified.